$488.00

產品名稱:      熱敏數據記錄儀
生產廠家:      MICROEDGE INSTRUMENTS (CANADA)
原產地:          加拿大 (Made in Canada)
產品系列:   SITE-LOG
產品編號:      LPTH-1

所有價格為美金 (US Dollar, US$)
第一次購買贈送一個128GB microSD卡

分類:

描述

產品名稱:      熱敏數據記錄儀
生產廠家:      MICROEDGE INSTRUMENTS (CANADA)
產品系列:   SITE-LOG
產品編號:      LPTH-1

SITE-LOG LPTH-1數據記錄器是7通道電池供電的獨立熱敏電阻數據記錄器,在非易失性閃存中最多可存儲8 MB數據。它可以記錄電阻,最適合10K NTC熱敏電阻。

即插即用USB端口和通用的自定義公式簡化了通信和工程單位轉換。 16位ADC使其非常適合需要精確測量的科學和實驗室應用。

只需將記錄儀插入計算機的USB端口,軟件即可自動識別記錄儀並處理配置,下載,圖形查看等。

特徵:

  • 16位模數轉換器
  • 8 MB內存大小
  • 7個外部熱敏電阻通道以及內部熱敏電阻,用於環境溫度。
  • USB和串行接口均具有高達115 kbps的自動波特率
  • 超過10年的電池壽命
  • 功能強大的軟件,用於配置,下載,繪圖,分析和警報報告
  • 可配置的警報控制/勵磁控制
  • 廣泛的採樣間隔選擇(20毫秒至12個小時)
  • 堅固的鋁製外殼
  • 帶塗層的PCB可以防止潮濕,腐蝕和發霉。

額外資訊

重量 0.6 kg
尺寸 22.8 × 15.2 × 10.1 cm

規格參數

Product Name SITE-LOG Thermistor Data Logger
Model LPTH-1
Inputs
Connection Plugable terminal block for seven external channels, alarm outputs
Channels One on-board thermistor temperature (-40°C ~ 70°C, -40°F ~ 158°F)
Seven external thermistors/resistors
Resolution 0.0018%
Accuracy +/- 0.2°C (0°C ~ 70°C, 32°F ~ 158°F) ( for 10K NTC thermistor, does not include thermistor probe error)
Alarms
Channel Alarms Two editable alarm thresholds per channel.
Alarm Output ALARM1 & A2/E terminal strips can be configured as alarm outputs.
Alarm-On: MOSFET(N-Channel) switch on
Alarm-Off: MOSFET(N-Channel) switch off
Max Power: 200mA @ 24VDC
Alarm-On Delay Programmable 0 – 10 minutes delay with 1-minute increment.
Alarm Indicator On-board LED becomes red when in alarm condition.
On-board Memory
Size 8 Mega bytes (4MB readings).
Data Retention Over 20 years.
Sampling
Sampling Interval 20 milliseconds to 12 hours programmable. (external power supply required if interval less than five seconds)
Logging Mode Stop recording or FIFO when memory is full.
Logging Activation Programmable instant, start delay or field push button activation.
Communications
Interface USB (Mini-USB-B) (USB-A-mini USB-B Cable included)
AUX(RJ11) for TTL level RS232 communications.
Baud Rate Auto-detect baud rate from 2400 to 115200 bps on both USB and AUX.
Battery
Power Built-in 3.6V Lithium Battery.
Battery Life 10 years based on 1 minute sampling interval.
Software
SiteView (Sold separately) Configuration, downloading, plotting, real-time view, custom calibration and custom equation.
Software Requirement Computer with 1.0 GHz or faster processor
1 GB Memory or higher
10 GB of available hard-drive space or higher
Windows XP with SP2 or later, Vista, Window 7,8,10
At least one USB port or one COM port.
Physical
Material Aluminum enclosure.
PCB Treatment Conformal coating.
Dimension 88 X 64.2 X 24 mm (3.46 X 2.53 X 0.95 inches).
Weight 200g
Mounting Probe/wall-mount holes for hanging/mounting.
Others
LED Indicator Tri-Color LED: (can be disabled for power saving)
Normal Sampling: light green when sampling.
Alarm: red when sampling.
Low Battery: amber when sampling.
Excitation Control A2/E terminal strip can be configured as excitation control output for driving the power of connected devices.
Warm-up delay interval settings: 10 to 240 seconds with 10-second increment.
Operating Environment -40 ~ +70 °C (-40 °F ~ 158 °F), 0 ~ 95% RH non-condensing.
Clock Accuracy ±1 mintue per month.
Approval CE, FCC

Logger Memory Capacity

Sampling Interval Enabled Channel Logging Capacity
1 minute 1 8 years
1 minute 2 4 years
1 minute 8 1 year
10 seconds 1 485 days
10 seconds 2 242 days
10 seconds 8 60 days
1 second 1 48 days
1 second 2 24 days
1 second 8 6 days
100 milliseconds 1 4 days
100 milliseconds 2 2 days
100 milliseconds 8 14.4 hours